Golden Gate T style electric guitar neck. Each neck is made from select Canadian Maple Unfinished, Rosewood fingerboard with M-O-P dot inlays for T-style guitar (Flat neck pocket) Pre-fretted with truss rod installed Headstock requires final shaping for that personal touch Holes pre-drilled for tuner installation Scale length: 25-1/2"Width at nut: 1-11/16" Width at 22nd fret position: 2-3/16" Fretboard radius: 12" Fretwire: .040" high x .100" wide Nut slot: 1/8" wide
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
Great for my purposes
I thought this was advertised as a 22 fret neck but it is actually a 21 fret neck. Not a big deal, just wanted to point this out though. I do not see where it is stated as a 22 fret neck at the time of this writing so maybe the description has been recently changed. It does mention the "22 fret position", but just be aware this is a 21 fret neck in case it matters to you. I got this neck to complete my first set builds so I didn't want to spend too much money. This neck was perfect for what I was looking for. Quality seems good and the headstock is easy to shape. Absolutely great price for the product. I'm completely satisfied with this purchase.
Click here to read the full review for more information about this product.
Not bad for the price - but inlay was loose
The neck itself is straight, nicely finished (for an unfinished neck) and arrived without any damage. However, when I pulled the masking tape (3M blue painter's tape) from the fretboard after finishing the maple, one of the inlays dots popped out, stuck to the tape. Unfortunately, I didn't notice until too late and the inlay dot is missing. Not a huge problem: since it was one of the double-dots on the 12th fret, I'll just replace both with StewMac Abalone for a special touch.
Still, very annoying and I'll have to keep an eye on the others.
golden gate s-96 t style guitar neck
I'd buy some more but you keep messing with the price. Put the price back and I will!
Decent neck with good finish work.
Product Features :
- Each neck is made from select Canadian Maple
- Unfinished, Rosewood fingerboard with M-O-P dot inlays for T-style guitar (Flat neck pocket)
- Pre-fretted with truss rod installed
- Headstock requires final shaping for that personal touch Holes pre-drilled for tuner installation
- Scale length: 25-1/2" Width at nut: 1-11/16" Width at 22nd fret position: 2-3/16" Fretboard radius: 12" Fretwire: .040" high x .100" wide Nut slot: 1/8" wide
- Scale length: 25-1/2" Width at nut: 1-11/16" Width at 22nd fret position: 2-3/16"
- Fretboard radius: 12" Fretwire: .040" high x .100" wide Nut slot: 1/8" wide
Rating : 4.6
List Price : $58.95
0 comments:
Post a Comment